You need to set up and configure the Notion Pro Hardware Devices to get live sensor data from your Site.
This section runs through what you need to do to:
•set the Database Logger service for the Network Receiver device
•set the default Network Receiver Service Port details
•add a Network Receiver device to your Notion Pro installation
•create Device Groups
You can:
The DB Logger Service is the Service that passes data to the Notion Pro SQL database.
The Listening Port Name and Number are set automatically during installation, but may be changed to suit your local IT installation if required. Select Admin>Device Configuration, then select
|
1.To change the Logger Service details click Edit to give the Database Logger Service Details dialog box. Make changes as required, then click Update Details. 2.To delete the Logger Service details click Delete for the relevant Service Port entry. Alternatively, select the tick box for the relevant entry, then click Delete Record. In both cases a confirmation box is displayed for you to confirm that you wish to delete the Service. Select YES if you are sure you wish to delete the Service, otherwise select NO. |
1.Select Admin>Device Configuration, then select 2.Enter the device details as required. In particular, you must select the Device Type and Installation Site from the appropriate pull-down menus. 3.When you have entered all the necessary details, click Add Device. |
You must have a Device Group, even if there is only one Receiver Device at your Site.
1.Select Admin>Device Configuration, then select 2.Give the Group a name, then select the Device Type from the pull-down menu. The available devices of that type will appear in the Non-Members list. 3.Select a device by highlighting it, then click 4.Click Add Members to create the Device Group. |
See also: